Views: 0 Author: Site Editor Publish Time: 2022-09-01 Origin: Site
The filter membrane 33 is fixedly installed inside one end of the horizontal tube 10 described in this embodiment. When the waste water inside the horizontal pipe 10 contains fine impurities, it is filtered by the filter membrane 33 to make the waste water cleaner.
Specifically, the activated carbon layer 34 is fixedly installed inside one end of the horizontal pipe 10 described in this embodiment. The activated carbon layer 34 can purify the wastewater inside the horizontal pipe 10 and make the wastewater inside the horizontal pipe 10 cleaner.
Further, the lower end of the vertical rod 26 described in this embodiment is fixedly installed with two stirring rods 32. After the disinfectant is put into the disinfection tank 22, the vertical rod 26 drives the stirring rod 32 to stir the liquid, which can make the disinfectant act on the wastewater more quickly and improve the wastewater treatment effect.
Finally, it should be noted that the above embodiments are only used to explain the technical scheme of the utility model, not to limit it; Although the utility model has been described in detail with reference to the foregoing embodiments, those skilled in the art should understand that it can still modify the technical solutions described in the foregoing embodiments, or replace some of the technical features equally; These modifications or substitutions do not make the essence of the corresponding technical solutions deviate from the spirit and scope of the technical solutions of the embodiments of the utility model.
Attached drawing description
In order to more clearly explain the embodiments of the utility model or the technical solutions in the prior art, the following will briefly introduce the drawings that need to be used in the description of the embodiments or the prior art. It is obvious that the drawings in the following description are some embodiments of the utility model, Other figures may also be obtained from these figures.
FIG. 1 is a structural diagram of the utility model; Fig. 2 is a view taken along the line a in Fig. 1.
Attached mark: 1 waste water tank 2 water inlet pipe 3 vertical pipe 4 valve 5 one-way valve 6 filter pipe 7 flange 8 filter layer 9 filter screen 10 horizontal pipe 11 box 12 first strip groove 13 first magnetic block 14 movable plate 15 second magnetic block 16 vertical plate 17 mycelium ball 18 wire rope 19 handle 20 U-shaped support 21 hook 22 disinfection box 23 first connecting pipe 24 motor 25 L-shaped support 26 vertical rod 27 dosing port 28 sterilization box 29 second connecting pipe 30 ultraviolet lamp 31 outlet pipe 32 mixing rod 33 filter The membrane 34 is the second strip groove of the activated carbon layer 35, the stopper 36 and the cover 37.