Publish Time: 2022-08-30 Origin: Site
In order to make the purpose, technical scheme and advantages of the embodiments of the utility model more clear, the technical scheme in the embodiments of the utility model will be clearly and completely described below in combination with the drawings in the embodiments of the utility model. Obviously, the described embodiments are part of the embodiments of the utility model, not all of the embodiments. Based on the embodiments in the utility model, all other embodiments obtained by ordinary technicians in the art without making creative labor belong to the scope of protection of the utility model.
The laboratory wastewater treatment equipment, as shown in the figure, includes a waste water tank 1. The top surface of the waste water tank 1 is fixedly installed with an inlet pipe 2. The inlet pipe 2 communicates with the inside of the waste water tank 1. The top surface of the waste water tank 1 is a straight plate, and the bottom surface of the waste water tank 1 is a
Several second magnetic blocks 15 are fixedly installed in the second strip-shaped groove 37. The first magnetic block 13 and the second magnetic block 15 can be attracted and matched. The top surface of the box body 11 is provided with a cover body 36. The bottom surface of the cover body 36 and the top surface of the movable plate 14 are fixedly connected by a wavy vertical plate 16. A number of mycelium balls 17 are arranged on both sides of the vertical plate 16. The mycelium balls 17 and the vertical plate 16 are connected by a wire 18. The top surface of the cover body 36 is fixedly installed with a handle 19. The top surface of the box body 11 is fixedly installed with an inverted U-shaped bracket 20, A hook 21 is fixedly installed on the upper end of the U-shaped bracket 20, and the hook 21 can hook the handle 19. A disinfection box 22 is provided on one side of the box 11. The disinfection box 22 and the box 11 are fixedly connected by a first connecting pipe 23. A motor 24 is provided on the top surface of the disinfection box 22. The motor 24 and the first connecting pipe 23 are fixedly connected by an inverted L-shaped bracket 25. The output shaft of the motor 24 is fixedly connected to the vertical rod 26, and the lower end of the vertical rod 26 is located in the disinfection box 22, The top surface of the sterilization box 22 is provided with a dosing port 27. One side of the sterilization box 22 is provided with a sterilization box 28. The sterilization box 28 and the sterilization box 22 are fixedly connected by a second connecting pipe 29. The ultraviolet lamp 30 is fixedly installed on the bottom surface of the sterilization box 28. The outlet pipe 31 is fixedly installed on the side of the sterilization box 28. The outlet pipe 31 communicates with the inside of the sterilization box 28. The utility model can better treat the wastewater in the laboratory, can degrade the concentration of organic substances in the wastewater and the color in the liquid, and can filter the impurities in the wastewater, disinfect and sterilize the wastewater, so that it can meet the discharge standard and reduce pollution.
When the utility model is used, the waste water enters the waste water tank 1 through the inlet pipe 2, and the valve 4 is opened. The waste water flows into the horizontal pipe 10 through the one-way valve 5. The waste water enters the box 11 through the horizontal pipe 10. The concentration of organic substances in the liquid and the color in the liquid can be degraded by the mycelium balls 17 in the box 11. The liquid in the box 11 enters the disinfection box 22 through the first connecting pipe 23, and the medicine is put into the disinfection box 22 through the dosing port 27, At the same time, the motor 24 operates, and the motor 24 drives the vertical rod 26 to rotate in the disinfection box 22, so that the waste water and the chemical solution can be quickly fused to sterilize the waste water. The waste water in the disinfection box 22 enters the sterilization box 28 through the second connecting pipe 29, and the ultraviolet lamp 30 operates to sterilize the waste water, so that it meets the discharge standard. When the mycelium ball 17 needs to be replaced for a long time, the first magnetic block 13 and the second magnetic block 15 can be separated by pulling the first magnetic block 13, the cover 36 can be lifted by the handle 19, the cover 36 can drive the mycelium ball 17 upward through the vertical plate 16, and the handle 19 can be hung on the hook 21 to replace the mycelium ball 17. The one-way valve 5 can make the waste water flow into the horizontal pipe 10 in only one direction, without flowing back into the vertical pipe 3, which makes the use of the utility model more convenient. The filter layer 8 can filter the precipitates in the liquid in the waste water tank 1 to make the liquid more clean after flowing out. After the filter screen 9 and the filter layer 8 in one of the filter tubes 6 are blocked, the filter screen 9 and the filter layer 8 can be taken out by closing the corresponding valve 4 and removing the flange 7, and then they can be replaced. During the replacement, the other filter tube 6 will not delay the normal use.